I plant in Sichuan XXX client ordered a Taiwan RL120 type molten paraffin granulator for granulation drying is in production, welcome customers for such drying equipment are interested to visit and advice! RL-type granulator is the use of the material properties of a melting point below 250 ℃, the viscosity range of the material according to the molten state, by means of special fabric was uniformly melted at constant speed below the strip, the strip provided below Under continuous cooling spray device, so that the material transport, transport shift obtained during cooling, curing, packaging, so as to achieve the purpose of granulation molding. This product is suitable for the material to adapt to the melting point (or softening point) at 50 ℃ -300 ℃ granulation of various materials needed, as well as the "cold crystallization" of the material characteristics. The technical requirements must be filtered solids material may not enter the granulation head, otherwise it will cause the nose to wear or blockage of granulation quality. Temperature control should be based on the melting temperature to be, insulation requirements temperature must not exceed ± 3 ℃. The cooling system should be added to the filter, cooling water temperature is generally between 5 ℃ -25 ℃ (low temperature, rapid prototyping, granular good, high yield). 

palabras clave: Wing Fat dry, dryer, granulating machine,